SkyRC Ferngesteuert

Das Akkuladegerät SkyRC NC3000 Pro ist ein fortschrittliches NiMH- und NiCd-Ladegerät für AA- und AAA-Akkus mit vier unabhängigen Kanälen, sechs Betriebsmodi, PD/QC-Unterstützung, Bluetooth-App-Steuerung und bis zu 3000 mA Ladestrom pro Slot.

Es bietet detaillierte Kontrolle über Laden und Entladen, mit einstellbarem Strom, Akkukapazitätsmessung, Lade-/Entladezyklen und Leistungsanalyse über die SkyCharger App.

• Vier unabhängige AA/AAA-Akkuschächte
• Sechs Modi einschließlich Turbo, Standard Charge, Discharge, MaxBoost, Break-in und Cycle
• Einstellbarer Ladestrom von 0.20 bis 3.00 A
• Doppellüfterkühlung mit intelligenter Drehzahlsteuerung
• FlexiPulse Überwachung des Innenwiderstands

Für präzises Akkumanagement entwickelt, hilft der NC3000 Pro dabei, kompatible Zellen sicher zu überwachen, zu testen, zu konditionieren und zu laden.

The innovative SkyRC Q200neo charger is the perfect choice for every RC enthusiast. It allows you to charge 4 different batteries simultaneously and can be powered by both direct current (DC) and alternating current (AC). It stands out with a power of up to 400 W and a built-in high-precision balancer that optimizes voltage equalization within ±0.02 V. Despite its powerful capabilities, the product is surprisingly compact and portable.

SkyRC NC2200 is a AA / AAA battery charger, which also performs a number of various other functions. With its help you will charge, discharge and rescue your battery. What's more, the device can also connect cells and perform resistance measurements. The charger has 4 independent slots, so you can perform different operations at the same time.

Real power
SkyRC has specifically designed a tool for remote control model enthusiasts to measure their speed and other data. The GSM020 allows you to connect to an app where you can monitor real-time data or their history. Simply attach the device to any car, drone or aircraft and hit the road.

High accuracy
GSM020 supports GNSS- GPS and GLONASS satellite navigation systems, allowing for very high positioning accuracy. The device allows measurement of acceleration, G force, speed, time, distance and more.

5 hours of operation with LiPo battery
Thanks to the built-in lithium-polymer battery, which allows up to 5 hours of uninterrupted operation, you don't have to worry about the device's short runtime. You can then easily recharge it via the micro USB port.

Mobile app
The free GNSS PA app allows you to track the device's speed remotely from your iOS or Android phone. Built-in Bluetooth 4.0 allows real-time data monitoring. Three modes: Drag, Track and Flying allow you to analyse your driving or flying route with ease.

All data in one place
The GNSS PA app automatically creates graphs. Laps on the track can be analysed in the app for average speed, maximum speed, acceleration at a given time and distance. Set your own time/distance range to check braking speed, accelerations up to 30 km/h, G-forces. Check altitude, speed, time and distance in flying mode.

Built-in 1 Mb memory
The built-in memory allows 50 records to be stored. Data can be easily transferred to a smartphone. When the flash memory is full, the oldest records will be automatically overwritten. There is no longer any need to remember to delete data or worry that key data will not be saved when the memory is full.

Charger B6AC Neo
The SkyRC B6AC Neo charger will surprise you with its vast capabilities. It can charge batteries with up to 200 watts (DC) or 60 watts (AC), as well as discharge them and monitor their condition. It stands out for its impressive performance and quiet operation, and thanks to the use of GaN technology it is extremely compact, making it much easier to transport. The device will also work well as a regular charger for a smartphone or laptop - it will provide power of up to 65 watts.

Innovative GaN technology - high performance, small size
The charger uses innovative GaN technology, so it combines high performance, efficient heat dissipation and a compact design. The device is smaller than a standard credit card, allowing for convenient, hassle-free transportation. You can carry it with you at all times!

Impressive power
Forget about the long wait until your batteries are charged. When the charger is powered by direct current (DC), it provides up to 200 watts of power, allowing you to reduce charging time to about 10 minutes. On the other hand, if you use alternating current (AC), the device's power will be a maximum of 60 watts. This will allow you to charge the battery in about 20 minutes! What's more, the XT60 DC interface and compatibility with 100-240 V AC provides more flexibility and freedom. Note: measurements were taken while charging a 6S LiPo battery with a capacity of 1300 mAh.

Discharge your battery in a few moments
Need to discharge a battery quickly? No problem - the B6AC Neo charger is equipped with a special port for efficient, effective discharging. Combined with the main port, it provides up to 19 watts of power. What does this mean in practice? For example, it only takes about 1.5 hours to discharge a 1300 mAh LiPo 6S battery. Remember, however, that if you choose to use only the main port, the power will be limited to 5 watts.

Check the condition of your batteries
Monitoring the condition of your batteries and taking proper care of them is the key to prolonging their life and ensuring your safety of use. The SkyRC B6AC Neo charger will help you do just that! With its help you can easily check the cell voltage and balance. This way you will always know if your battery needs charging, discharging or balancing! Note: the voltage and balance measurement function is available for LiPo, LiHV, LiFe and LiIon batteries.

Universal charger and digital power supply
With the SkyRC B6AC Neo charger you will charge not only your batteries, but also, for example, your smartphone, laptop or Nintendo Switch console. The device is equipped with an additional USB-C port, which supports PD 65 W fast charging. This allows your equipment to be up and running in no time! In addition, the B6AC Neo will prove itself as a digital power supply - it offers an optimal voltage of 2-27 V with 0.1 V increments and an adjustable current of 1-10 A.

Performance and safety
The charger uses a patented rectifier circuit to efficiently convert DC current for safe power supply. It also has a built-in MCU that precisely controls charging to minimize power loss. Its added advantage is an advanced protection system against short circuit, overheating and overvoltage, among others. So you can enjoy not only performance, but also safety!

User-friendly
Convenient operation of the charger is made possible by the built-in display with the new ColorX interface, which features a clear, responsive menu and specially designed, easy-to-read icons. What's more, you can choose from up to 5 languages - English, Dutch, French, Chinese and Japanese. Also noteworthy is the quiet operation of the device - even at full load the volume level of its fans is only about 48 dB. Don't be afraid of annoying noise! There is also a dedicated Charger Master app, which, among other things, allows you to conveniently update the charger's software - just connect it to your computer via a USB-C port.

SkyRC T1000 Maestro charger
SkyRC T1000 Maestro is a new, incredibly powerful RC model charger that stands out with up to 450W (AC) or even 1000W (DC). It uses an advanced Arm Cortex-M4 core and is equipped with a color display that will provide you with the most important information regarding its operation. It allows you to use 2 ports at the same time, and you will have no problem transporting it. Special Charger Master software is also available, which provides even more capabilities.

Reliable performance
Push the limits with the SkyRC T1000 charger and get more options for your next RC race. The product supports advanced DSP technology and has a state-of-the-art Arm Cortex-M4 core, which also uses a coprocessor (FPU). As a result, it can deliver incredible speed, performance and reliability! Bet on proven solutions and choose a charger that works in almost every situation.

Even faster charging
Enjoy even faster charging. The charger is equipped with 2 ports that will allow you to charge 2 batteries simultaneously in a short time. You can also choose between AC and DC input. In AC mode, the charging power reaches 450W, and in DC mode it is up to 1000W! This will charge your batteries up to 9 times faster (in AC mode) or up to 20 times faster (in DC mode) than with standard chargers.

Intelligent power distribution
When you use only one port, the charger will direct all its power to that port and provide up to 20A. When you use both ports, the charging current parameters will be dynamically and intelligently divided between each of them. So you can enjoy optimal performance in most situations! What's more, when one port finishes working, the other will start charging at full capacity. When using 2 outlets simultaneously, the total current is up to 35A.

Digital power supply
The T1000 will not only perform well as a charger, but can also act as a digital power supply. All it takes is a few clicks on its menu! The product offers a voltage of 5-27V with 0.1V increments and an adjustable current of 1-15A. It is also equipped with short circuit, overload and reverse polarity protection. Thus, it provides unparalleled performance and safety!

Additional capabilities
Do you care about additional capabilities? Try the separately available devices that work with the charger! For example, the BD350 discharger provides a maximum of 40A. In combination with the T1000 Maestro, it also allows you to check the condition of the battery using Charger Master software. There is also a charging hub that can handle up to 150W and offers up to 4 ports (3x USB-C, 1x USB-A).

User-friendly interface
The charger features an easy-to-read 2.8″ TN LCD screen with a clear ColorX interface. It provides a resolution of 240x320 and displays the image in 262,144 colors. Also noteworthy is the 250:1 contrast ratio. Responsive Web2.0 menus and specially designed icons make operating the device much simpler and more pleasant! What's more, the interface offers 4 languages to choose from - English, Dutch, Chinese and Japanese.

Will prove itself while traveling
Take the charger to your next RC event and don't sacrifice the ability to quickly charge your batteries while you're away. The T1000 Maestro is compatible with 100-240V, which means you can use it in many countries around the world without any problems. The product is also equipped with a special handle, which makes it much easier to carry.

Try out the Charger Master software
Get convenient access to the most important information - just use the Charger Master software. Simply connect the T1000 charger to your computer with a USB-C cable! Once you do, for example, you can download OTA updates and sync the latest software version to the cloud in real time. You can also view a graph of charging/discharging data.

In the box
T1000 charger
AC power cable
User manual

Das multifunktionale Smart-AC/DC-Ladegerät SkyRC Q100neo bietet vier unabhängige Ladeports, AC/DC-Stromoptionen, breite Akkuunterstützung und präzise Ladekontrolle für RC-Modelle, Drohnen und Modellakkus.

Das kompakte Ladegerät kann bis zu vier Akkus gleichzeitig laden, wobei jeder Port unabhängig arbeitet und bis zu 6 A Ladestrom liefert.

• AC-Ladeleistung bis zu 100 W
• DC-Ladeleistung bis zu 240 W
• Unterstützt LiPo-, Li-ion-, LiFe-, LiHV-, Pb-, NiMH- und NiCd-Akkus
• Einstellbarer DC-Netzteilmodus mit Strom bis zu 6 A
• Farbdisplay mit Betriebsparametern für jeden Kanal
• Schutz gegen Verpolung, Überhitzung, Überlast, Überspannung und zu lange Ladezeit

SkyRC Q100neo hilft, mehrere Akkupacks effizient vorzubereiten – mit flexibler Stromversorgung, klarer Bedienung und integrierten Sicherheitsfunktionen.

SkyRC E450 is a universal charger dedicated to 2-4 S LiPO/LiFe/LiHV and 6-8S NiMH packs. It is extremely easy to use, and will charge small capacity batteries very quickly. The status of the charger is indicated by 4 LEDs. In addition, the charger automatically detects the charge of the batteries and finishes charging. The charger comes with a power cable for connecting to 230 V mains power.

SkyRC GC301-Gyro is dedicated for RC cars. The device uses a gyro sensor and a special algorithm to adjust the position of the wheels for even better stability and handling characteristics. The GC301 makes the model even more maneuverable and easier to control. It is also extremely lightweight and small, so it can be used on models of any scale without worrying that it will prove too heavy or significantly increase the weight of the model.

Simple and sure
SkyRC BD250 is a discharger and battery tester in one. The device displays battery voltage, discharged charge and discharge current in real time. The maximum discharge current is as much as 35 amps and the maximum discharge power is 250 watts. The BD250 also accurately measures capacity so you can choose the most appropriate battery for your needs. You can be sure that with the SkyRC discharger you will maintain optimal performance and lifetime of your batteries.

Updated version
The BD250 is based on the BD200 model. It combines a stylish design with high performance and advanced technology to ensure constant discharge of 250 watts.

Not just unloading
SkyRC BD250 allows you to test batteries of any type with 5.4 V up to 35 V. The device has a built-in fan, which is part of an advanced cooling system, ensuring optimal operation of the device, even when discharged at full power.

Comfortable operation
The knob on the front panel allows you to easily change parameters that can be read on the LCD display.

Software
Thanks to dedicated PC software, the BD250 allows you to export battery voltage values in 30-second intervals (for the first 6 minutes).

Included:
BD260 Unloader
Unloading cable with connector XT60
Fuse

SkyRC NC2500 Pro AA / AAA charger
The SkyRC NC2500 Pro charger allows not only charging AA and AAA batteries, but also regenerating them. The device offers several different modes of operation, and has the added advantage of a run-in function that allows you to run-in model motors that have not been used for a long time. You also have a USB port that supports QC 3.0 fast charging, and the charger is equipped with 6 battery slots.

As many as 4 available features
The NC2500 Pro offers as many as 4 modes of operation. This way you can not only charge the batteries of your choice, but also discharge or regenerate them. In this way you will extend their life! A brake-in function is also available. All this will allow you to optimize the operation of your batteries, take care of their condition, and even protect them from wear and tear or damage!

Charge 6 batteries simultaneously
With the NC2500 Pro you can charge up to 6 batteries simultaneously. The device is equipped with 6 slots and offers a maximum current of 2.5A. The charger also offers a special Step Charging mode, which allows you to adjust the amperage for successive charging steps. So you can take even better care of the condition of your batteries and enjoy their optimal performance!

Easy operation
Convenient operation of the device is enabled by a special dial. The charger is also equipped with an easy-to-read display, so you can check the current amperage, voltage and capacity for each channel at any time. On the screen you will also find information about the current operation mode and elapsed time. Just take a look!

Effective protection against overheating
Don't worry that your battery will overheat and be damaged. The charger uses an innovative FlexiPulse algorithm that prevents similar problems! When the device detects that the cell's internal resistance increases above a certain level during charging, it will automatically reduce the amperage to maintain the right temperature. In this way, it will protect the battery from overheating!

Run-in function
The NC2500 Pro is more than just a charger. The device offers an additional run-in function. It allows you to run-in model motors that have not been used for a long time. In this way you will prepare them for the next races and gain confidence that they will not let you down! Bet on proven solutions and achieve better and better results.

Additional USB port - fast charging
With the NC2500 Pro charger you can also charge your phone in a short time. The device is equipped with an additional USB port and supports QC2.0 / QC3.0 fast charging. It also provides voltage and current at 5V / 3A and 9V / 2A. This makes the charger perfect for a variety of scenarios. You no longer have to wait too long for your smartphone to be ready for use!

In the box
BD350 battery discharger / tester
XT60 connection cable

Das Ladegerät SkyRC e3S ist ein kompaktes netzbetriebenes Lithium-Akkuladegerät für RC-Modelle und unterstützt LiPo-, LiHV- und LiFe-Akkus in 2S- und 3S-Konfigurationen mit automatischem Laden und integriertem Balancer.

Das Ladegerät verwendet eine einzelne Modustaste zur Auswahl des Akkutyps und startet dann automatisch den Ladevorgang, sobald der Akku angeschlossen ist, wobei die korrekten Strom- und Spannungsparameter eingehalten werden.

• Unterstützt LiPo-, LiHV- und LiFe-Lithium-Akkus
• Kompatibel mit 2S- und 3S-Akkupacks
• Integrierter Zellbalancer mit bis zu 300 mA Balancierstrom
• Lagermodus für LiPo- und LiHV-Akkus
• AC 100–240 V Netzstromversorgung

Mit einfacher Bedienung und kontrolliertem Laden hilft es, kompatible RC-Modellakkus für den Einsatz zu Hause oder in einer Modellbauwerkstatt vorzubereiten.

Double the power and mobility
The SkyRC T200 charger has the most compact design, taking up minimal space, the tick of a pair of batteries. The charger delivers 100 watts of integrated power through each charging circuit. Behind the tasteful casing is enough power to charge two batteries simultaneously at up to 12 amps per channel, so you'll be pumping life into a wide range of batteries in no time, from receiver packs to 6S lithium polymer or NiMH and NiCD 15S batteries. What's more, the charger provides all the programmability you expect from a modern high-end charger.

Multiply efficiency
Both charging channels can be programmed and operated individually. The T200 allows two batteries to be charged intelligently, automatically and simultaneously to their maximum capacity. What's more, the cells being charged do not have to have the same configuration or be of the same type. Feel completely free to choose which packs to charge.

Compatibility and universal XT60 plug
The charger has a charging algorithm that allows it to work with the most common battery types - LiPo, LiIon, LiHV, LiFe, NiMH, NiCD and Pb. The XT60 interface prevents reverse polarity and ensures a very stable connection.

Optimised software
The SkyRC T200 has a so-called AUTO function, which automatically sets the current during charging and discharging. For lithium batteries in particular, the function helps prevent overcharging, which can lead to an explosion due to the user. The function automatically shuts down the circuit and informs the user when an abnormality is detected. All programmes on the T200 are controlled by a two-way signal to ensure maximum safety and minimise problems. All settings can be configured by the user.

Intuitive operation
A panel of five buttons and a brightly illuminated LCD screen make operation of the unit effortless, even for inexperienced users. The charging programmes work in a similar way to other SkyRC chargers, but even if this is your first contact with a programmable charger, you will easily move between parameters by using the up and down arrows to set values and then clicking enter to confirm.

Versatility with AGM and cold modes
AGM batteries are easy to maintain, are very stable and lighter than other lead-acid batteries. Although they have the same structure, the difference in chemical components translates into a big difference in performance. AGM batteries should not be charged with a normal charger in Pb mode. Cold mode allows the battery to be charged at a low temperature.

Adjustable terminal voltage
The SkyRC T200 allows users to change the terminal voltage (for advanced users only).

Special handle
The charger is equipped with a special handle. Its compact design at less than 1 kg makes it the most convenient charger to carry.

Included
T200 charger
Power cable

Das Lithium-Akkuladegerät SkyRC Type35 unterstützt 2–4S LiPo-, LiHV- und LiFe-Akkus mit USB-C PD 3.0 Eingang, bis zu 35 W Ladeleistung und bis zu 2 A Ladestrom.

Der Type35 lädt direkt über den Balancer-Anschluss, überwacht die Zellen einzeln für präzises Balancieren, während ein intelligentes Temperaturmanagement einen stabilen Betrieb während des Ladevorgangs unterstützt.

• Unterstützt LiPo-, LiHV- und LiFe-Akkupacks
• Kompatibel mit 2–4S-Konfigurationen
• USB-C Power Delivery 9–20 V Eingang
• Laden über Balancer-Anschluss
• Dreifarbige LED-Statusanzeige
• Maximal 300 mA Balancierstrom

Kompakt und einfach zu bedienen, eignet sich der SkyRC Type35 für das Laden in Werkstatt, auf der Strecke und im Gelände, wenn flexible Lithium-Akku-Unterstützung benötigt wird.

SkyRC D200neo Charger
Get acquainted with the D200neo, a device that provides instant charging with up to 35A of current. It is designed to save users' time, as it is always ready to go. This advanced device is comfortable to use, thanks to its built-in color display. In addition, it intelligently and dynamically distributes charging power. The D200neo also supports USB-C 3.0 Power Delivery (PD), enabling faster and more efficient charging.

Fast and smart charging
The D200neo provides dual-port parallel charging with a lightning fast charging current of up to 35A. It is designed to save your time to the maximum. This device is always ready for action! Thanks to an innovative combination of software and MCU, D200neo provides supercharging. It also intelligently and dynamically distributes charging power when both ports are active simultaneously. When only one port is active, D200neo will direct all its power to that one port, guaranteeing optimal and fast charging. In addition, it also supports USB-C 3.0 Power Delivery (PD) for even faster and more efficient charging.

More options
The SkyRC device is equipped with dual ports that operate independently, providing efficient and simultaneous charging of two batteries. What's more, the D200neo offers the flexibility to choose between AC and DC input, adapting to different scenarios. In AC mode, it provides charging power of up to 200W, while in DC mode, the output increases up to 800W. In addition, you can choose DC charging at 800W for the greatest efficiency, or use AC charging at 200W to tailor its performance to your specific needs. The D200neo is an absolute revolution in the world of RC chargers.

Professional charger
The D200neo is not only a professional charger, but also a high-quality digital power supply. At the click of a menu, the D200neo is ready to go, offering optimal voltage from 5-27V with 0.1V increments and adjustable current from 1 to 15A. Additional protections against short circuit, overload and reverse polarity ensure safety and peace of mind during use. What's more, the D200neo is equipped with a 200 MHz ARM microcontroller, which is able to increase the resolution of the ADC to 16 bits thanks to its oversampling technology. A powerful PID mechanism precisely adjusts the current, providing a responsiveness and accuracy of charging current that is unmatched by most standard devices on the market.

All information at your fingertips
SkyRC has a built-in display with ColorX interface, which makes the information presented in color, making it much easier to operate the device. When working with the BD350, the D200neo can use the customized SkyRC Charger Master to display or export the battery discharge curve in real time. This makes it possible to compare and analyze the discharge curves of different batteries to accurately detect faulty batteries. NOTE: The BD350 and SkyRC Charger Master are not part of the kit.

Thoughtful design
Thanks to its universal input voltage circuit, you can take the SkyRC device with you on any trip, no matter where you go! In addition, this product is designed and approved to meet global standards for safety, electromagnetic compatibility and other mandatory regulatory requirements. With SkyRC, you are always ready to travel!

Easy control
The D200neo, connected to a PC or Mac via USB-C, allows monitoring and control via the SkyRC Charger Master app. You can also update the charger as OTA and synchronize the latest software in real time with a dedicated cloud. Charging and discharging data can be analyzed and displayed in a graph. The interface is currently available in English, Dutch, Chinese, French and Japanese. Users can easily change it with simple clicks, making SkyRC use even more convenient.

Das zweikanalige Lithium-Akkuladegerät SkyRC PC1080neo unterstützt LiPo- und LiHV-Akkus bis 6S mit 1080 W Gesamt-Ladeleistung, zwei unabhängigen Kanälen und 1–20 A Ladestrom.

Für die Akkuvorbereitung mit hoher Leistung entwickelt, kann der PC1080neo zwei Packs gleichzeitig mit unterschiedlichen Parametern laden und bietet die Modi Fast Charge, Balance und Storage.

• 1080 W Gesamtausgang, 540 W pro Kanal
• Kompatibel mit LiPo- und LiHV-Akkus bis zu 6 Zellen
• 2.8-Zoll-Farbdisplay mit Anzeige von Spannung, Strom, Kapazität und Ladezustand
• ARM Cortex-M3 Prozessor mit Balanciergenauigkeit bis zu ±10 mV pro Zelle
• Multi Safe Circuit Schutz gegen Kurzschluss, Verpolung, Überhitzung, Überspannung und Überladung
• Firmware-Updates über USB-C mit Charger Master für Windows und macOS

Mit unabhängigen Kanälen, klarer Überwachung und einstellbaren Ladeparametern hilft es, Lithium-Akkupacks für anspruchsvollen Geräteeinsatz bereit zu halten.

Das Smart-Ladegerät SkyRC B6neo+ ist ein kompaktes Akkuladegerät für RC und Unterhaltungselektronik mit bis zu 240 W DC-Ladeleistung, Power Delivery Unterstützung, einem 1.77-Zoll-Farbdisplay und Unterstützung für mehrere Akkutypen.

Für den Einsatz zu Hause und im Gelände entwickelt, lädt und wartet der B6neo+ LiPo-, LiFe-, LiIon-, LiHV-, NiMH-, NiCd- und Pb-Akkus, mit einer intuitiven ColorX-Oberfläche für eine klare Einstellungskontrolle.

• Bis zu 240 W Ladeleistung mit DC-Eingang
• Bis zu 126 W Ladeleistung mit Power Delivery
• Unterstützt Lithium-Akkupacks bis zu 6 Zellen
• USB-C Software-Updates über die Charger Master App
• Integrierter Akkutester über den Balancer-Anschluss
• Lüfterkühlung mit ca. 48 dB maximaler Geräuschentwicklung

Mit flexibler Akkuunterstützung, klaren Bildschirminformationen und aktualisierbarem Betrieb hilft der B6neo+, Akkupacks für RC-Modelle und elektronische Geräte einsatzbereit zu halten.

The SkyRC BD380 is an advanced discharger and analyzer that combines a range of functions to ensure precise and efficient battery management. This product, developed by SkyRC, is dedicated to professionals and enthusiasts, offering advanced testing and analysis capabilities in a single device.

SkyRC iMAX B6mini Akkuladegerät

Das AC/DC-Smart-Ladegerät SkyRC S100neo unterstützt LiPo-, LiHV-, LiFe-, LiIon-, NiMH-, NiCd- und Pb-Akkus mit AC/DC-Stromeingang, Zellbalancierung und mehreren Betriebsmodi.

Der SkyRC S100neo ist ein kompaktes Ladegerät für RC-Modellbau, Elektronik und DIY-Projekte und verfügt über ein 1.77-Zoll-TN-Farbdisplay, das während des Ladevorgangs Spannung, Strom und Akkustatus anzeigt.

• AC-Ladeleistung bis zu 100 W
• DC-Ladeleistung bis zu 200 W
• Lade-, Balance-, Entlade- und Lagermodus
• Balancierstrom bis zu 1000 mA
• Digitale CC/CV-Netzteilfunktion
• Einlaufmodus für Bürstenmotoren
• Integriertes Akkuspannungsmessgerät

Für flexibles Laden und präzise Überwachung entwickelt, hilft der S100neo kompatiblen Akkus, gleichmäßig zu laden und stabiler zu arbeiten.

SkyRC E3 is a universal charger dedicated to LiPO 2-3 S packs. It is extremely easy to use, and will charge small capacity batteries very quickly. The status of the charger is indicated by 3 LEDs. In addition, the charger automatically detects the charge of the batteries and finishes charging. The charger comes with a power cable for connection to 230 V mains power.

DC Input Voltage: 10-30V
AC Input Voltage: 100-240V
Charger Power: AC: 100W MAX; DC: 200W MAX
Discharge Power: Main Port: 5W; Balance Port: 25W MAX (LiPo/6S)
20W USB-C Power Delivery Charging: QC3.0: 5V⎓3A, 9V⎓2A, 12V⎓1.5A 18W; PD: 5V⎓3A, 9V⎓2.2A, 12V⎓1.67A 20W

SkyRC SK-200008 Netzteil & Spannungsumwandler Drinnen 60 W Schwarz

Das zweikanalige AC/DC-Modellladegerät SkyRC D750 MIX bietet zwei unabhängige Ladekanäle, AC/DC-Betrieb, bis zu 32 A pro Kanal, ein farbiges LCD-Display, USB-C PD und kabelloses Smartphone-Laden.

Der D750 MIX ist für das Laden von Modellakkus in der Werkstatt, auf der Strecke oder im Gelände ausgelegt, mit separater Kanalsteuerung zum gleichzeitigen Laden von zwei Akkupacks mit unterschiedlichen Parametern.

• Unterstützt LiPo-, LiHV-, LiIon-, LiFe-, NiMH-, NiCd- und Pb-Akkus
• Integriertes AC-Netzteil und Unterstützung für externe DC-Stromversorgung
• Ladeleistung bis zu 1100 W pro Kanal bei DC
• Farbiges LCD-Display zeigt Spannung, Strom, Kapazität und Betriebszeit
• USB-C Power Delivery Anschluss bis zu 20 W
• Kabelloses Smartphone-Lademodul

Mit flexiblen Stromversorgungsoptionen und Zweikanalbetrieb erleichtert der SkyRC D750 MIX das effiziente Verwalten mehrerer Modellakkus.